- Contact Us：
-
+86-028-85255257
- sales@f-tone.com
标准光�？�
标准协议光�？�
- 全国产化光�？�
- 25G~400G高速光�？�
- 200km超长距光�？�
- 5G移动通信光�？�
- SFP光�？�
- CWDM SFP
- DWDM SFP
- BIDI-SFP
- SGMII SFP
- HDMI
- Video SFP光�？�
- Copper SFP
- 低功耗SFP
- SFP+光�？�
- CWDM SFP+
- DWDM SFP+
- BIDI SFP+
- Tunable SFP+
- QSFP光�？�
- QSFP+ 光�？�
- QSFP28光�？�
- QSFP-DD光�？�
- MicroQSFP光�？�
- OSFP 400Gbps
- XFP光�？�
- CWDM XFP
- DWDM XFP
- BIDI XFP
- 1x9光�？�
- CSFP光�？�
- CSFP+10G光�？�
- 16GFC SFP+
- 25GE SFP+
- 32GFC SFP+
- CXP光�？�
- CFP光�？�
- CFP2光�？�
- CFP4光�？�
- CFP8 400Gbps
- CDFP 400Gbps
- DSFP光�？�
- FT-61光�？�
- OLT光�？�
- ONU光�？�
- PLCC光�？�
- RJ光�？�
- SFF光�？�
- SFP-DD光�？�
- SFP28光�？�
- SNAP12光�？�
- USOT光�？�
- X2光�？�
- Xenpak光�？�
- 光电编码器�？�
- 光�？椴馐园�
- 光�？榱幼�
- DAC 高速线缆
- 光纤滑环|光电滑环
- 光缆车
- 军品级DIN光�？�
- 塑料光纤�？�
- 替换安华高工业电力光�？�
- 兼容国产化替换安华高光耦
- 射频光�？�
- 微型多路光�？�
- 特种光�？�
- 特种光纤连接器
- 特种光电连接器
- USB光纤延长线
- 特种电连接器
- 特种光纤光缆
- 光藕
- SMA测试线缆
- OSA
- PON BOSA
- Pigtailed PD
- RFoG BOSA
- TO-CAN
- 光纤温度传感器
- 光纤应变传感器
- 光纤加速度传感器
- 光线压力传感器
- 光纤位移传感器
- 光纤应力传感器
- 光纤传感剖析仪
- 光纤漫衍式测温主机
- 光纤布里渊信号解调仪
- 漫衍式光纤声振信号解调仪
- Camera Link
兼容协议光�？�
- 华为光�？�
- 思科光�？�
- 华三光�？�
- 中航光电光�？�
- 中兴光�？�
- 锐捷光�？�
- 惠普光�？�
- 神州数码光�？�
- Juniper光�？�
- Extreme光�？�
- Brocade光�？�
- D-Link光�？�
- 赫思曼光�？�
- 阿尔卡特朗讯光�？�
- Allied Telesis光�？�
- Foundry光�？�
- Force10光�？�
- Blade光�？�
- Linksys光�？�
- Marconi光�？�
- 博达光�？�
- 网件光�？�
- Nortel光�？�
- Moxa光�？�
- �？低親IKVISION光�？�
- McAfee光�？�
- SMC智邦光�？�
- 安华高Avago光�？�
- 飞通光�？�
- Finisar光�？�
- yellobrik SDI光�？�
- 罗克韦尔AB光�？�
- 罗杰康光�？�
- 研华Advantech光�？�
其它种类光器件
- 全国产化光器件
- 光纤阵列系列
- 高速�？槲⒘�
- 相干通讯光连接
- 硅光子器件光链接
- Bio-Medical Equipment
- Components for Fiber Laser
- Components for Fiber sensing
- Components for Optical Network
- EDFA光纤放大器
- 光纤传感器
- High power Component
- Hybrid for EDFA
- Test Equipment & Others
- Test Equipment & Others
- 保偏光器件
- 光分路器
- 光开关
- 探测器
- 光功率计
- 全光纤相位拉伸器
- 光纤准直器
- 光衰减器系列
- 光偏振控制器
- 光源
- 光环行器Circulator
- 光纤延迟线
- 色散赔偿�？�
- 光纤放大器
- 无源传输转换器
- 光纤激光器
- 光调制器
- 光电探测器
- 光纤偏振
- 光纤滤波器
- 同轴激光器
- 同轴电缆
- 光纤法兰适配器
- 光纤跳线&尾纤
- SMA-特殊纤芯系列
- 特殊接头系列
- 铠装系列
- 光耦合器Coupler
- 皮纤跳线系列
- 大芯数系列
- 回路跳线系列
- 保偏光纤系列
- 光通信组件
- 光隔离器isolator
- 其它光器件
- 可调滤波器
- 可调衰减器
- 拉锥耦合器
- 无源光器件
- 法拉第旋转镜
- 波分复用器
- 滤波器
- 蝶形激光器
- 光耦合器&分路器
- 光纤环形器&法拉第旋转镜
- 光纤隔离器&波分复用器
- 光纤分束器&合束器（PBS/PBC）
- 光纤光栅
- 高速线缆
技术支持
BiDi XFP 10KM
Specifications
- 产品型号: FTCX-BXX1X-10X
- 兼容品牌: 全系列
- 封装类型: XFP
- 传输速率: 10G万兆
- 传输距离: 10KM
- 发射波长: 1330nm/1270nm
- 接收波长: 1270nm/1330nm
- 事情温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
- 数字诊断: 带DDM
- 接收灵敏度: 10KM
- 接收灵敏度: 10KM
Description
BiDi XFP 10km
BiDi XFP 10km单纤双向万兆光�？� ，支持10G传输速率 ，发射部分接纳低颤抖、高性 能的 1330nm/1270nm DFB激光组件(1330/1270纳米波长) ，可支持最大传输距离10km。支持热插拔 ，单纤双向传输 ，带 数字诊断监控功效 ，支持商业级温度规模（ 0°C to 70°C(Standard), -40°C to 85°C (Industrial)）。 主要应用在10GBASE LR Ethernet以太网 ，10G LW Fibre Channel光纤通道等领域。
Features
- Supports 9.95Gb/s to 11.1Gb/s bit rates
- Hot-pluggable XFP footprint
- Maximum link length of 10km with SMF
- 1270/1330nm DFB laser Transmitter and 1330/1270nm Receiver
- XFP MSA package with LC connector
- No reference clock required
- Loop Back Support.
- +3.3V ，+1.8V power supply
- Power dissipation <2W
- Compatible with RoHS
- Built-in digital diagnostic functions
- Temperature range:0°C to 70°C(Standard), -40°C to 85°C (Industrial)
Applications
- 10GBASE-BX 10G Ethernet
Description
F-tone BIDI XFP 10KM is compliant with the IEEE803.3ae 10Gbase-Bx. and transmission distance up to 10km on SMF.The transceiver module comprises a transmitter with a 1270/1330nm DFB laser transmitter, an integrated 1330/1270nm detector preamplifier(IDP) mounted in an optical header and a limiting post-amplifier IC. Transmitter and receiver are separate within a wide temperature range of 0°C to 70°C(Standard), -40°C to 85°C (Industrial) and offers optimum heat dissipation and excellent electromagnetic shielding thus enabling high port densities for 10 GbE systems.
Electrical Characteristics
|
Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
Note |
||
|
Operating Case Temperature Range |
Tc |
0 |
+70 |
℃ |
||||
|
Power Supply Voltage @ 3.3V |
Vcc3 |
3.13 |
3.3 |
3.47 |
V |
|||
|
Power Supply Voltage @ 1.8V |
1.62 |
1.8 |
1.98 |
|||||
|
Module total power |
P |
2 |
W |
|||||
|
Transmitter |
||||||||
|
Input differential impedance |
Rin |
100 |
? |
1 |
||||
|
Differential data input swing |
Vin,pp |
120 |
820 |
mV |
||||
|
Transmit Disable Voltage |
VD |
2.0 |
VCC |
V |
||||
|
Transmit Enable Voltage |
VEN |
0 |
0.8 |
V |
||||
|
Transmit Disable Assert Time |
10 |
us |
||||||
|
Receiver |
||||||||
|
Differential data output swing |
Vout,pp |
340 |
850 |
mV |
||||
|
Data output rise time |
tr |
38 |
ps |
2 |
||||
|
Data output fall time |
tf |
38 |
ps |
2 |
||||
|
LOS Fault |
VLOS fault |
Vcc – 0.5 |
VccHOST |
V |
3 |
|||
|
LOS Normal |
VLOS norm |
GND |
GND+0.5 |
V |
3 |
|||
|
Power Supply Rejection |
PSR |
See Note 3 below |
4 |
|||||
Notes:
1. After internal AC coupling.
2. 20 – 80 %
3. Loss Of Signal is open collector to be pulled up with a 4.7k – 10kohm resistor to 3.15 – 3.6V. Logic 0 indicates normal operation; logic 1 indicates no signal detected.
4. Per Section 2.7.1. in the XFP MSA Specification.
Optical Characteristics
|
Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
Ref. |
|
Transmitter |
||||||
|
Optical output Power |
P |
-5 |
0 |
dBm |
||
|
Optical Wavelength |
λ |
1260 |
1270 |
1280 |
nm |
|
|
1320 |
1330 |
1340 |
||||
|
Side Mode Suppression Ratio |
SMSR |
30 |
dB |
|||
|
Optical Extinction Ratio |
ER |
3.5 |
dB |
1 |
||
|
Average Launch power of OFF transmitter |
POFF |
-30 |
dBm |
|||
|
Tx Jitter |
Txj |
Compliant with each standard requirements |
||||
|
Receiver |
||||||
|
Receiver Sensitivity |
RSENS |
-14 |
dBm |
2 |
||
|
Receiver Sensitivity in OMA |
RSENS |
-12.5 |
dBm |
2 |
||
|
Maximum Input Power |
PMAX |
+0.5 |
dBm |
|||
|
Optical Center Wavelength |
λC |
1320 |
1340 |
nm |
||
|
1260 |
1280 |
|||||
|
LOS De-Assert |
LOSD |
-18 |
dBm |
|||
|
LOS Assert |
LOSA |
-30 |
dBm |
|||
|
LOS Hysteresis |
1 |
5 |
dB |
|||
Notes:
1, PRBS 231-1 test pattern @10.3125Gbps.
2, PRBS 231-1 test pattern @10.3125Gbps, BER≤10-12.
| Part No. | Description |
| FTCX-B231X-10 | BIDI XFP 1270nm/1330nm, 10Gbps, 10km, 0?C ~ +70?C |
| FTCX-B321X-10 | BIDI XFP 1330nm/1270nm, 10Gbps, 10km, 0?C ~ +70?C |
| FTCX-B231X-10I | BIDI XFP 1270nm/1330nm, 10Gbps, 10km, -40~+85℃ |
| FTCX-B321X-10I | BIDI XFP 1330nm/1270nm, 10Gbps, 10km, -40~+85℃ |
Related Products
XFP-850多模光�？�
Supports 9.95Gbps to 10.5Gbps bit rates
Maximum link length of 300m (50um,MMF,2000MHz.Km)
850nm VCSEL laser and PIN receiver
Low power consumption <1.5W
+3.3V +1.8Vpower supply
XFP MSA package with duplex LC connector
XFI electrical interface
No reference clock required
Compatible with RoHS
Excelllent EMI performance
Built-in digital diagnostic functions
Temperature range: 0℃ to +70℃
High reliability
XFP-10KM光�？�
Supports 9.95Gb/s to 11.1Gb/s bit rates
Hot-pluggable XFP footprint
Maximum link length of 10km with SMF
1310nm Uncooled DFB laser
XFP MSA package with duplex LC connector
No reference clock required
Compatible with RoHS
+3.3V +1.8V power supply
Power dissipation <2.5W
Built-in digital diagnostic functions
Operating temperature: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
XFP-40KM 光�？�
Features
Supports 10GBE Application at the Data-Rate of 9.953Gbps to 10.3125Gbps
Maximum link length of 40km with SMF
1550nm cooled EML laser and PIN photodiode
XFP MSA package with duplex LC connector
XFI High Speed Electrical Interface
+5V, +3.3V,+1.8V power supply
Low Power Dissipation 3.5W Maximum
2-wire interface for management and diagnostic monitor
Compatible with RoHS
Compatible with IEEE 802.3ae 10 Gigabit Ethernet
Compatible with Sonet OC-192/SDH STM-64
XFP-80KM光�？�
Features
XFP MSA Compliant
data rate from 9.95 Gbps to 11.1Gbps
No Reference Clock required
Cold Start up Wavelength Compliance
EML transmitter and APD receiver
link length up to 80km
Low Power Dissipation 3.5W Maximum
Operating Case Temperature：商业级0℃～+70℃/工业级-40℃～+85℃ 可选
Diagnostic Performance Monitoring of module temperature, supply Voltages, laser bias current, transmit optical power, receive optical power
RoHS compliant and lead free
XFP-120KM光�？�
Features
XFP MSA Rev 4.5 Compliant
Data rate from 9.95Gbps to 11.3Gbps
Cooled EML with isolator
APD receiver
link length up to 120km (with amplifier)
Low Power Dissipation 3.5W Maximum
XFI and lineside loopback Mode Supported
Operating Case Temperature：商业级0℃～+70℃/工业级-40℃～+85℃ 可选
Diagnostic Performance Monitoring of module temperature, Supply Voltages, laser bias current, transmit optical power, and receive optical power
RoHS compliant (lead free)
BiDi SFP+ 10G 10km
BiDi SFP+ 10G 10km单纤双向万兆光�？� ，支持10G传输速率 ，发射部分接纳低颤抖、高性 能的 1330nm/1270nm DFB激光组件(1330/1270纳米波长) ，可支持最大传输距离10km。支持热插拔 ，单纤双向传输 ，带 数字诊断监控功效 ，支持商业级温度规模（ 0°C to 70°C(Standard), -40°C to 85°C (Industrial)）。 主要应用在10GBASE LR Ethernet以太网 ，10G LW Fibre Channel光纤通道等领域。